Re: [ihc] 1 inch body lift

[Howard R Pletcher <n9ads@xxxxxxxx>]

There should be no problems with a 1" lift other than you need to
disconnect the steering rag joint while you are doing the lift as you
will likely raise the body more than 1" while installing the lift.  It
should work fine after you set the body back down.  There shouldn't be
any problem with the shift levers, although getting to low range is where
a problem usually first occurs so that's the spot to check.

Howard


On Sun, 09 May 2004 10:28:42 -0600 william cunningham
<slypigs@domain.elided> writes:
> Are there any major issues associated with a 1 inch body lift, on a 
> Scout II, other than:
> Drop the shroud.
> Keep an eye on the gas filler tube.
> Make sure the shift levers clear/don't hit (manual tranny).
> It looks like I may be able to get another inch of adjustment out of 
> the clutch linkage.
> The only other issue I can think of is the steering, hope its not as 
> involved as a 2 inch lift.