Re: [ihc] Attention Wire Heads : A "Signal" For Help!

[Howard R Pletcher <n9ads@xxxxxxxx>]

I'd suggest you first verify you're getting 12V out of the brake light
switch, then pull the wheel and clean the dried out grease and crud out
of the switch, relube it, and see if that fixes the problem.  That was
John Stricker's problem a few months back when he had similar symptoms.

Howard

On Mon, 15 Dec 2003 22:10:49 -0600 "Peter Ferris" <binder@domain.elided>
writes:
> 
> : the problem probably is in the turn signal switch contacts, 
> : as the brake lights run through there, with the brake light 
> : circuit on one side being disconnected inside the switch when 
> 
> Ugghh! This doesn't sound encouraging!  But as always, you speak truth,