Re: Holley ProJection vs 4BBl carb

[Vinnie Moscaritolo <vinnie@domain.elided>]

On 1/12/99, Men from Black Helicopters forced "Steven Stegmann" to write :


> The Holley techs told me to buy a square to spread bore adaptor and use
> that.  They said to get an "open plenum" design.  What this means is one
> where the whole inside is machined out.  There are not four individual
> passages.
>
> Steve


The one that Giddum Up Scout sells is machined for two plenums. and he wants
about $350 for it.  They are hot tanked but still have some gunk on them.

I am hearing lots of bad feedback from people who have friends that 
had problems with the Holley 2bbl system. stuff like burned out fuel 
pumps etc..

I am starting to think that the right thing to do is to buy a 392 motor and
EFI that ..

Vinnie Moscaritolo
http://www.vmeng.com/vinnie/
Fingerprint: 3F903472C3AF622D5D918D9BD8B100090B3EF042
-------------------------------------------------------

Those who hammer their swords into plows,
will plow for those who don't."