RE: [ihc] Re: ihc-digest V7 #626

["Timon, John" <john.timon@xxxxxxxxxx>]

I've come into this thread late, and am feeling somewhat ignorant.

what is meant by backspacing.  




--
John Timon

     Unix like TeePee no windows, no gates, Apache inside.



-----Original Message-----
From: owner-ihc@domain.elided [mailto:owner-ihc@domain.elided] On Behalf Of joel
brodsky
Sent: Thursday, September 23, 2004 4:37 PM
To: ihc@domain.elided
Subject: [ihc] Re: ihc-digest V7 #626


Brian,
I run 33-1250-15s on 15x10 with 4.25" backspacing and
they don't rub unless I'm hitting something with the
tire ie. curb, rocks, cliff wall, etc.

with only 2.75 inches of backspacing you'll have 2/3
of the wheel outside of the bearing and with 35s
you'll be putting a heckuva load onthe bearings front
and rear.  Ouch.  My bet is that you'll be servicing
bearing about eery 2 years or so.  I have 4" springs
and 2" extended shackles, but the springs are more
like 5".  When I measure the truck, it comes out about
8" higher, after the urethane bushings too.

I'm running this setup on a Traveler and a Scout II, 33-1250-15s, 4.25"
backspacing 15x10s, 4-5" springs, 2"+ extended shackles.

hope it helps...

JoelB

Date: Sat, 18 Sep 2004 00:18:22 -0600
From: "Brian Day" <bdaycs@domain.elided>
Subject: [ihc] Wheel backspacing for 35's

So I'm still figuring out the details for putting
35x12.50 R15 tires on 
my
'78 Scout after
I get the thing lifted.  I've been recommended to run
15x10 wheels with
2.75" backspacing.
Looking around, it seems that low of a backspacing
isn't real common... 
at
least for the 15x10
cheapish steel wheels I've been looking at.

Do they rub if you go with a more standard 3.5"
backspacing?  Any other
opinions on
the backspacing?

Thanks!

Brian



		
__________________________________
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!
http://promotions.yahoo.com/new_mail