IHC/IHC Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[ihc] Prestolite wire
While trying to troubleshoot a problem with my 1977 345 with a 1979
Prestolite dist. I
noticed a wire that is not connected. The red and black wires are
connected to the coil
but the white wire is connected to nothing and I doubt it ever has been
in the last 6+
years of my ownership. I don't have a manual for the year this dist. was
used so I am at
a slight disadvantage.
Should I worry about this disconnected wire? Could it have any bearing
on what feels like
a miss/hesitation or surge/detonation situation? The RPM's swing +/- 50
at 2000 RPM,
idle is fine at 625 RPM, a little hesitation/shudder when leaving idle,
exceleration feels
smooth and normal once it gets to 1000 RPM and up.
I put a fresh cap and rotor on, changed the fuel filter, and fixed the
slight exhaust leak,
no joy yet.
Waiting for the day to cool off before I check the timing.
Willy
77 SS II
Home |
Archive |
Main Index |
Thread Index