[ihc] RE: ihc-digest V7 #560

["Beijer, P.A.C." <P.A.C.Beijer@xxxxxx>]

Rocky,

My '71 1310 4x4 has the 8 lug pattern with 5/8" studs on both the rear RA15
and the front D70 axles.
A couple of months ago when I adapted the hubs of my '74 200 for fitting Dodge
rotors I compiled a Word document from the Dorman site with all available
lugstuds listed with dimensions and a small picture.
The zipped file is about 8MB large so I'm not sure if it'll fit into your
mailbox, but I'd be happy to send it to you.

Paul
--



>Date: Thu, 29 Jul 2004 13:00:33 -0400
>From: Rocky Lear <rockylear@domain.elided>
>Subject: [ihc] Re: Wheel Studs

>The stock RA 15 studs were 9/16". Dunno if Dorman sells 9/16" ones that
>will work or not. They DO have 5/8".

>Greg


>Well....all the one ton axles I have have the 1" nuts on them (ie 5/8
diameter
>studs) . The RA15 that I >was test fitting on is in the back of a 73 1310
2wd. I
>don't have any IH one ton 4x4 axles with the 8 >lug pattern. Those may have
9/16
>studs. Of course the studs on the left side of the truck I have are >left
handed
>threaded which I don't care for either but the main thing is that the wheels
I want
>to use need to  be used with 9/16 diameter studs. Did the one ton 4x4's have
9/16
>diameter studs?

>Rocky