Re: [ihc] High Amp Alternator

To: George B Humphrey <xgbhx@xxxxxxxx>
Subject: Re: [ihc] High Amp Alternator
From: John Hofstetter <hofs@xxxxxxxxxxxx>
Date: Mon, 19 Jul 2004 11:41:06 -0700
Cc: tsm1@xxxxxxxxx, ihc@xxxxxxxxxx
Content-transfer-encoding: 7bit
Content-type: text/plain; charset=US-ASCII; format=flowed
In-reply-to: <20040719.110718.-728131.1.XgbhX@domain.elided>
References: <20040719.110718.-728131.1.XgbhX@domain.elided>
Reply-to: John Hofstetter <hofs@xxxxxxxxxxxx>
Sender: owner-ihc@xxxxxxxxxx

On Jul 19, 2004, at 11:07 AM, George B Humphrey wrote:

Speaking of high amp starters, I finally tested the amperage draw of my
starter, as you recommended. Don't know if you remember but I was having
trouble getting the fast idle solenoid on the Holley Projection to stay
out during cranking. Everything checked out okay. The amperage draw of
the starter was just a little over 200. Still don't know what's causing
the problem

Thinking about it some more, George, I think your problem almost certainly that you are hooked into a run-only circuit.

If you need for me to look anything up for you, just let me know.

John

John Hofstetter
Ol' Saline
www.goldrush.com/~hofs

References:
- Re: [ihc] High Amp Alternator
  - From: George B Humphrey

Prev by Date: Re: [ihc] High Amp Alternator
Next by Date: [ihc] Things that whine that shouldn't
Previous by thread: Re: [ihc] High Amp Alternator
Next by thread: Re: [ihc] High Amp Alternator
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index