[ihc] bearing roller RPM

To: ihc-digest@xxxxxxxxxx
Subject: [ihc] bearing roller RPM
From: "James Lidberg" <jameslidberg@xxxxxxxxx>
Date: Tue, 16 Mar 2004 22:01:48 -0700
Content-transfer-encoding: 7bit
Content-type: text/plain; charset=US-ASCII
Reply-to: "James Lidberg" <jameslidberg@xxxxxxxxx>
Sender: owner-ihc@xxxxxxxxxx

I just eyballed the front wheel bearing rollers and measured that they rotate about 3.5 to 3.75 times each inner race 
rotation.

So, if the wheel is rotating about 700 RPM the little rollers are about 2600 or so.

Morey's grease states that 5000 is the limit for small bearing RPM.

- Jim in Mesa
**************
Jim In Mesa - James Lidberg
jameslidberg@domain.elided
'79 Scout II/4X4/345/Edelbrock 1400/727/D20/3.07 open/PS/PB/4"Trailmaster
Copyright 2004 All rights reserved

Follow-Ups:
- Re: [ihc] bearing roller RPM
  - From: Jim or Ginger Aos

Prev by Date: Re: [ihc] Front Spindles Heat treated?
Next by Date: Re: [ihc] bearing roller RPM
Previous by thread: Re: [ihc] Strange Behavior
Next by thread: Re: [ihc] bearing roller RPM
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index