[ihc] tranny tubing

["James Lidberg" <jameslidberg@xxxxxxxxx>]

Is this tubing OK for the auto tranny lines on my '79 Scout 2:

http://www.mcmaster.com/asp/DisplCtlgPage.asp?reqtyp=catalog&CtlgPgNbr=108&se
snextrep=406479228535952
p/n 5177k45

Temp. Range: -400 to +1800 F
 Bendable: Yes
 Flareable: Yes  Soft (Annealed) Type O Temper: Low tensile (stretching)
strength
 Fittings: Compression (see
{HYPERLINK
"javascript:document.FrameworkASPPgRange.RelatedCtlgPgs.value='119,120,121,12
2,123,124,125,126,127,128,129,13
0,131,132,133,134';document.FrameworkASPPgRange.CtlgPgNbr.value='119';documen
t.FrameworkASPPgRange.CtlgEdition.value='11
0';document.FrameworkASPPgRange.ReqTyp.value='CATALOG';document.FrameworkASPP
gRange.submit();"}pages 119-134 ) Also
known as Alloy 3003-O, this lightweight, seamless tubing has a lower pressure
rating and is softer and more bendable
than general purpose tubing above. Made from aluminum with magnesium. OD
tolerance for 1/8" to 1/2" is 1.005"; for 5/8"
OD tubing it's 1.006". Use with air, alcohol, gas, oil, vacuum, and water. Not
rated for sterilization. Meets ASTM B483-
95.


Thanks,

Jim in Mesa
**************
Jim In Mesa - James Lidberg
jameslidberg@domain.elided
'79 Scout II/4X4/345/Edelbrock 1400/727/D20/3.07 open/PS/PB/4"Trailmaster
Copyright 2004 All rights reserved