Re: [ihc] Center pins

["James Lidberg" <jameslidberg@xxxxxxxxx>]

I think my Traingle springs took 3/8".

I bought them at NAPA and had to grind down the heads to fit the hole in the axle spring pad.

After I added shims I needed to make some custom pins.

Next time I will use grade 8 all thread with the tall nuts (available at bolt & fastener houses), and grind the nuts to 
fit.

- Jim in Mesa


From:           	"Ryan Moore" <baradium@domain.elided>
To:             	hofs@domain.elided, ihc-digest@domain.elided
Copies to:      	T_R_E_Jr@domain.elided, dnuenke@domain.elided
Subject:        	[ihc] Center pins
Date sent:      	Tue, 23 Dec 2003 16:56:06 -0500
Send reply to:  	"Ryan Moore" <baradium@domain.elided>

> 
> My question is:  what size is the center pin, or bolt or whatever you want 
> to call it?


+++++++++++++++++++++++++++++++++
COPYRIGHT 2003 James M. Lidberg
jameslidberg@domain.elided
ALL RIGHTS RESERVED
++++++++++++++++++++++++++++++++