IHC/IHC Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [ihc] Travelall electric rear window problems
I think there's a safety switch inside the door to keep the window motor
from engaging when it's not aligned. There could be a bad connection at the
key switch. Either could be defective or may have worked loose. Also, quite
often, bad grounds will cause the problem. If the window works when directly
powered, lube it up and find the open circuit. These units are simply too
hard to find to dismiss so easily.
-Allan
----- Original Message -----
From: "ballinthejack" <ballinthejack@domain.elided>
To: <ihc@domain.elided>
Sent: Thursday, December 11, 2003 8:40 AM
Subject: [ihc] Travelall electric rear window problems
> I'm having a fit over my rear window electrical mechanism. It just went
> dead, I have tested the motor and it runs when directly powered--both
> directions. Can I replace the whole thing with a mechanical crank? If
> so, where might I find one? BTW, I have a spare electrical setup
> including arms, motor, etc.
> Also, does NE1 know what the relay (in the rear window electrical
> circuit) is for--that is mounted at the bottom of the steering column
> inside the cab? It has no marks on it and is silver 1"x3/4"x1". Could a
> failure here cause a problem with my rear window? BTW, the rocker switch
> on the dash tests good.
Home |
Archive |
Main Index |
Thread Index