IHC/IHC Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [ihc] Electronic to Points conversion question
Joseph,
I have a 75 that had the gold box system. I have since changed it over to
the points system. The wires are the same for both. If you change to the
points system you will need a points distributor, rotor and cap.
If you stay with the gold box system, I have a complete gold box, and
distributor and all the wires between. Contact me off list if you are
interested.
One thing I would suggest is check the spark plugs first. Pull one and take
a look. If they are 303's I would change to the 85's. I had the exact
trouble you describe when I installed the champion 303's. It's worth
checking.
Just my thoughts.
David
-----Original Message-----
From: owner-ihc@domain.elided [mailto:owner-ihc@domain.elided]On Behalf Of
Joseph Shaw, II
Sent: Tuesday, September 16, 2003 4:40 PM
To: ihc@domain.elided
Subject: [ihc] Electronic to Points conversion question
The '75 Scout II I just got has the gold box. It is the first "NEW" Ih I
have
ever had that had the electronic system. As I described yesterday, it does
not want to hold idle, nor does it want to move under its own power even
when
I keep it gassed. I am trying to trace the issue, but today is the first
day
I have had a chance to tinker much. What I have done is tinker with the
timing a bit (got slightly better results), turn out the idle circuit screws
of the carb (got slightly better results), and that is about it. I have
lots
of leftover tune-up parts from other IH's, but realize that the electrical
system throughout the ignition system is considerably different between the
two. I BELIEVE that I need higher powered Spark plug wires for the
electrical
system, no? I have two sets, brand new, that were for points systems that I
would like to use, but if they will not handle the load properly, I don't
want
to waste time and the equipment. Am I correct in thinking I need completely
different wires? And the dist is different, too, isn't it? This one SEEMS
to
have very little mechanical advance (although it does seem to have some). I
have a spare dist as well from a points system, but know they won't work
either-may just have to switch to points system (if that is cheaper than
buying new electriconic distributor). Does the electronic for some reason
advance less under mechanical advance? It seems when I rev it it doesn't
move
but a few degrees. My memory tells me that all of my older points type IH's
moved considerably more than this when rev'ed.
Thanks for any advice on this!
Michael
Home |
Archive |
Main Index |
Thread Index