Re: CheapPistonUpOrDownTool

[Twmart@domain.elided]

In a message dated 99-06-23 14:04:52 EDT, Howard wrote:
> Then, remove the bolt and turn the engine backwards almost 2 revolutions,
>  reinsert the bolt, and again bring the piston up to touch the bolt in the
>  reverse direction.  Mark the crank again.  TDC should be 1/2 way between
>  the two marks.

Why 2 turn backwards to find TDC just insert the bold into the plug hole turn 
engine ne way make your mark then go back the other... done Right????

Tom