PS pump puller

["Owen" <renarac@domain.elided>]

Forgot.

I've got kind of an unusual puller with a little clamp built into the arms
so it doesn't spread the arms out and pull over the lip of the pulley.

Throw the arms of Plews type puller in a vise. Done.


----- Original Message -----
From: Owen <renarac@domain.elided>
To: <DORKIEST@domain.elided>; <ihc@domain.elided>
Sent: Friday, June 04, 1999 12:15 AM
Subject: Re: AGR PS pump


> Here's a tip for getting the pully off a PS pump, without much fiddeling
> with holding the pulley in place.
>
> Hook an air impact ratchet up to it and hold the pulley in your hand if
> you've got a good firm grip.
>
> Whoop! Whoop! Whoop! In short little bursts and it's off. Be careful if
you
> don't have a good grip because you can catch your fingers between the pump
> housing and the pulley.
>
> I've also used a big wrench around the sides of the fingers on the puller
> tool, but that wrench never seems to be handy when I'm into it.
>
>
> ----- Original Message -----
> From: <DORKIEST@domain.elided>
> To: <ihc@domain.elided>
> Sent: Thursday, June 03, 1999 12:41 PM
> Subject: Re: AGR PS pump
>
>
> > In a message dated 99-06-02 20:00:36 EDT, you write:
> >
> > << AGR PS pump >>
> > Robert D. I put on the Pump last year.  It's just a little more $$$ than
a
> > rebuilt.  If you just want more pressure, try the Jim Weed Pump pressure
> > up-grade.
> > http://www.off-road.com/~jweed/
> > AGR pumps don't come with the reservoir or pulley.  Its not hard to put
> > together, but I had a hard time taking my pulley off even with the right
> > tools.   The Gear box is about the same as any rebuilt box.
> > Scott Ray
> > http://members.aol.com/DORKIEST/scout1.html
> >
>
>