IHC/IHC Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: folding windshields
On Thu, 13 May 1999 23:05:34 -0400 Doug Rasmussen
<DougRasmussen@domain.elided> writes:
>Message text written by "Tom Harais"
>>My understanding is you can mount an 80 windshield frame on an 800
and=
>get a folding windshield on your 800. One of the Digest "techs" can
confirm
>or quell this "urban legend" before it gets out of hand.<
>
>Tom,
>
> I wish it was that simple. AFAIK, the windshield sheet metal on the
>80/800's doesn't come off easily like on the Scout II's.
>
> I've lusted for a folding windshield since the day I bought my 800.
And
>I've asked a few of the vendors about it. So far, they've all thought
>it'd be a whole lot of work and haven't seen anyone who's done it. It
has
>been suggested that folding windshields *MAY* have been a seldom ordered
>option on 800's. Maybe Howard knows.
>
Folding windshields were a VERY SELDOM ordered option as they were NOT
offered once the change was made.
I've never had the windshield out of an 80/800, but I'm certain the
frame can be unbolted and taken out. They are shown as a stand-alone
piece in the parts book. I'd expect that the body didn't change enough
that the older windshield couldn't be able to be made to work--you might
have to drill some new holes or something. I believe there was a
previous discussion about being able to interchange hoods between the two
models, which partially says the windshields have to be close to the
same. But, I also haven't heard of anyone that has interchanged
windshield frames either---yet.
Howard Pletcher
Howteron Products Scout Parts
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
Home |
Archive |
Main Index |
Thread Index