Re: transmissions

[Howard R Pletcher <n9ads@domain.elided>]

Yes, IH offered 5-speeds from the Loadstar trucks in the pickups and
Travelalls, but not in the Scout.  Almost nothing is impossible to
install if you try hard enough, but it's not a simple bolt in swap as you
have to go to a remote mounted transfer case and rear driveline length,
or the lack of it, can become a problem.

There were 3 different models:

	13034--6.21, 3.43, 1.81, 1.00, and .823, 	13035--7.17,
3.96, 2.36, 1.41, and 1.00, 	13036--6.21, 3.43, 2.05, 1.225, and
1.00
There were also later model codes of 13494, 13495, and 13496 and IH also
used some Clark and New Process 4 speeds, but these are rare in pickups.

Howard Pletcher
Howteron Products Scout Parts

On Wed, 21 Apr 1999 06:45:14 -0700 (PDT) Russel DeArman
<russde_93@domain.elided> writes:
>  I have seen a couple ads on the Binder Bulletin for
>5-speeds from IH trucks.
>  Will these trani's fir in a Scout II? If yes, what
>kind of gear ratios do they have?
>

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]