Re: Springover update

[Curt Cleavinger <rcleavin@domain.elided>]

My front axle is twisted to add caster, and to tilt the pinion upward some (though
not enough for the pinion to point straight at the transfer case). I'm going to 
point the rear pinion at the transfer case. I plan to replace both driveshafts
with ones that have CV (double cardan) joints on the transfer case side, but
I'm going to wait until the axles are reinstalled under the springs (and supporting
the weight of the vehicle) before measuring and ordering the driveshafts.

>Date: Wed, 17 Feb 1999 15:14:42 -0600
>From: Michael_Thompson@domain.elided
>Subject: Re: ihc-digest V6 #576
>
>Curt, how are you solving the caster problem with your spring-over?  Did you
>purchase a new front d-shaft?  I want to perform this mod to my '76 Traveler 
>and
>would like appreciate advise.
>
>Thanks
>
>MT

---
Curt Cleavinger
x53723
R-332J
---