Antennas on 69-75 PU and TA and WM...

[jmbrodsky@domain.elided]

Chris and Ranae,

        The antenna is held in with a hidden bolt under the pivoting part.
Unscrew the common phillips screw that holds the pivot on the base of the 
antenna.  As you remove the antenna you'll notice another phillips head that
appears to point down.  It clamps an assmelby onto the backside of the fender 
and can be tightened to your hearts content.  I try and arrange mine so that the
antenna closely matches the window frame.

        On my '75 I removed the entire thing and ran 1/2 conduit up the window 
frame along the top to the roof rack post.  Looks killer, and never breaks 
antennas off on the trees anymore!

Good luck,

-Joel Brodsky
'76 Scout II
'75 T'all 4wd
'74 T'all 2wd

-----INCLUDED MESSAGE FOLLOWS-----

From: "Chris and Ranae Procyk" <procyk19@domain.elided>
Subject: Antennas

On that subject, HTH do you tighten the passenger's fender antenna on the
'69- on trucks?  My WM's is loose, and I can't get to the bottom so the
whole thing just spins when I try to tighten it.  It looks like I have to
remove the fender, for god's sake.

------------------------------