RE: Major advice needed

["Eppinger.Michael" <Eppinger.Michael@domain.elided>]

The caster correctors are a threaded insert that replaces the factory
threaded insert.  The factory ones are straight thru, whereas the correctors
are offset, so you will be tilting your balljoints mount to add up to 1.5
degs of caster, with out any negative side effects, like spring wedges.  For
more info, you can go out to my web page or email me directly.
www.cafes.net/epp

Hope this helps,

Epp
The Scout Ranch

> -----Original Message-----
> From:	cookiedan@domain.elided [SMTP:cookiedan@domain.elided]
> Sent:	Wednesday, January 20, 1999 6:44 PM
> To:	s_stegmann@domain.elided
> Cc:	skipdup@domain.elided; ihc-digest@domain.elided
> Subject:	Re: Major advice needed
> 
> Epp can answer this better than I, but; here it goes... 
>    The add-a-caster installs with the ball joints and adds up tp, I
> think, 1 1/2" positive caster without hurting the pinion angle. Check
> the Web Ring for the Scout Ranch web site.
> 
> Dan Nees
> cookiedan@domain.elided
> The
> "Good" 1979 Scout II  345/auto 
> The
> "Bad" 1971 Scout II 304/T-18 
> And the
> "Ugly" 1979 Scout II 345/auto 
> 
> http://members.tripod.com/~IHCaholic/scoutindex.html 
>