Re: 727 rebuild

To: cookiedan@domain.elided (Daniel Nees)
Subject: Re: 727 rebuild
From: jlandry@domain.elided (John A. Landry)
Date: Fri, 11 Dec 1998 00:57:38 GMT
Cc: ihc@domain.elided
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
In-Reply-To: <23639-36705FD7-3288@domain.elided>
References: <23639-36705FD7-3288@domain.elided>
Reply-To: jlandry@domain.elided (John A. Landry)
Sender: owner-ihc@domain.elided

In a brilliant stroke of genius, cookiedan@domain.elided (Daniel Nees) blurted
out:

>   Does anyone think it would be possible to drill and tap the converter
>for a drain plug?

I would think it would be easy to do, but it might upset the dynamic
balance of the convertor.  If you're interested, I can measure my spare
convertor and give you the location for the drain plug.  The plug appears
to be a 1/8" NPT or smaller pipe plug.

John L.
-------------------------------------------------------------------------- 
jlandry AT halcyon DOT com    |
Conservative Libertarian      |  
Life Member of the NRA        |        All the GOOD things in life
WA Arms Collectors            |              are DANGEROUS!
Commercial Helicopter - Inst. |  
www.halcyon.com/jlandry/      |

References:
- Re: 727 rebuild
  - From: cookiedan@domain.elided (Daniel Nees)

Prev by Date: Re: Help Replacing Sliding Side Windows
Next by Date: Re: 727 rebuild
Prev by thread: Re: 727 rebuild
Next by thread: Re: 727 rebuild
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index