Re: HELP!!!! SPRINGS......AGAIN

[cookiedan@domain.elided (Daniel Nees)]

Matt,
   Get a oxy torch set. Heat the inner sleave really hot. The rubber
will expand and force the sleave out. Let the rubber cool and push it
through with a screw driver and hammer. Then take a hacksaw blade and go
through the ey and cut two slots through the outer sleave. Once that
strip of sleave is ot you can pry the rest out with a screw driver. If
you are high tech, take an air chisel with a chisel bit and cut the
outer sleave out. Works better than the hacksaw mehod.

Dan Nees
cookiedan@domain.elided
The
"Good" 1979 Scout II 345 4barrel, auto, AC, roll bar, carpet, 32 gallon
tank, tint windows, factory tow hooks, pillow back back seat, rice
burner front seats, tilt steering, cruise control, air horn, 4
speakers,amp, graphic EQ, CB, Tuffy-like console, 2 new BFG 31" tires,
factory chrome wheels. See this page for a picture.
http://members.tripod.com/~IHCaholic/plan.html 
The
"Bad" 1971 Scout II 
And the
"Ugly" 1979 Scout II 

http://members.tripod.com/~IHCaholic/scoutindex.html