Re: trans problem

[cookiedan@domain.elided (Daniel Nees)]

Bob,
   First, Drop the pan and do a rear band adjustmant. When you get the
pan and filter out you will see a large jam nut with a smaller screw in
the middle. loosen the jam nut and turn the screw in until it gets
tight. Then back the screw out about 1/4 turn, I think. Then tighten Jam
nut up. Then change the fluid and put a new filter in. After doing that
take a can of 2+2 carb cleaner and empty it down the fill pipe of the
tranny. This will help soften the seals. Lastly, if this doesn't help
entirely, try adjusting the kickdown rod.

Dan Nees
cookiedan@domain.elided

   1979 Scout II 345, Auto, 3.07's, Trak-Lok, really cool pulling
clevis'. One Ugly and Trusty Truck covered in mud!

1971 Scout II 304, D30/44, D20, power steering.

http://members.tripod.com/~IHCaholic/scoutindex.html