IHC/IHC Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Point Type Ignition System Question
John,
I have a '78 Scout with the original electronic ignition system in which I
switched to a points distributor. If your coil does not have an internal
resistor like my new one does, then yes you do need an external ceramic
resister between the two poles. When I decided to take my resitor off, six
months later my coil was dead and my points were fried. I will eventually
go back to an electronic distributor, but if you have any questions on the
wiring I can help.
Later,
Jon
Home |
Archive |
Main Index |
Thread Index